Series G 420Download PDFCatalogue No.: UT-GXG-115-420 | Revision 00

Key Features

  • Teeth Curved as well as barreled
  • Improved Seals – Perform much better than O rings
  • Full Teeth engagement – Reduces uneven wear
  • Piloting on Teeth OD – Ensures better dynamic balance
  • Higher Bore capacities
  • Compact
  • Wide Range – Full Gear , Semi Gear , Spacer Couplings
  • Full Floating & Semi Floating Shafts
  • Special shape of Discs to ensure Pure Tensile load
  • Higher Flexibility with better Torque Ratings
  • Unitised Disc Packs

General Assembly Drawing

Series 80 CC Diagram

Dimensions and Standard Sizes

Size HP/100 Nom
Torque		 Peak
Torque		 Max
Speed		 Max
Bore		 A B Dia C Dia D Dia E G Dia H
  RPM NM NM RPM RPM MM MM MM MM MM MM MM
G115 10 710 1420 10000 42 87 115 85 60 42 3 105
G150 24 1710 3420 7400 55 103 150 106 78 50 3 120
G180 50 3560 5800 5900 70 127 180 132 100 62 3 150
G195 65 4630 7730 5600 80 127 195 145 113 75 5 150
G210 90 6410 10700 5000 90 165 210 160 126 80 5 180
G240 150 10685 16400 4300 100 185 240 180 140 90 5 205
G250 185 13180 21100 4300 110 185 250 192 155 90 5 205
G290 230 16380 25200 3900 125 226 290 212 170 110 6 238
G320 428 30500 45750 3500 140 246 320 240 190 120 6 305
G350 587 41800 62700 3200 165 278 350 270 216 135 8 360
G390 793 56500 84750 2900 180 318 390 295 240 155 8 385
G420 1032 73500 116000 2700 200 348 420 325 265 170 8 420

Engineering Data

Size Pilot
Bore		 wt MR^2 Max
Misalignment
Parallel		 Ang Axial Grease
Reqd		 Bolt
Toghtening
Torque
  MM MM Kg KgM^2 QTY*DIA MM Deg +-MM
G115 15 4.0 0.006 1.1 1.5 6 0.06 9
G150 15 8.6 0.019 1.3 1.5 6 0.11 40
G180 20 15.5 00.43 1.7 1.5 6 0.16 70
G195 30 19.0 0.062 1.7 1.5 6 0.20 70
G210 40 24.5 0.100 2.1 1.5 10 0.30 70
G240 40 36.0 0.192 2.4 1.5 10 0.45 180
G250 40 42.0 0.250 2.4 1.5 10 0.50 180
G290 50 59.0 0.435 3.0 1.5 12 0.56 350
G320 50 84.0 00.90 4.0 1.5 12 00.9 350
G350 50 116.0 01.41 4.5 1.5 16 01.6 350
G390 60 170.0 02.70 5.0 1.5 16 02.1 600
G420 75 220.0 04.00 5.5 1.5 16 03.0 600
Mass and Inertia MR^2 are at pilot bore. Limited End Float , Extra end Float on request. Dimension H is alignment Clearance.
Download PDFCatalogue No.: UT-GXG-115-420 | Revision 00