Series 54Download PDFCatalogue No.:UT-54 | Revision 00

The design permits very small distance between shaft ends.The design is ideal for applications where nonspacer Gear Couplings are to be replaced by Metaflex Couplings.

The design has twin disc packs & accommodates misalignment in all directions. The design however requires either driving or driven machine to be shifted for removal of disc packs.

General Assembly Drawing

Series 52 Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore B, Hub Length A Dia C Dia
  RPM NM NM RPM MM MM MM MM
100 1.8 128 256 18650 25 39 83 3
125 3.7 263 526 15800 32 47 98 3
162 6.9 491 982 13900 42 48 111 3
200 13.5 962 1924 11200 53 54 138 3
225 19.0 1353 2706 10450 58 58 145 3
262 27.8 1980 3960 9200 70 66 168 5
312 38.6 2750 5500 7800 85 72 198 5
350 73.6 5243 10486 7000 100 83 221 6
375 98.6 7025 14050 6300 105 90 246 6
425 114.0 8120 16240 5800 110 101 267 6
450 137.0 9760 19520 5400 120 114 287 8
500 257.0 18310 36620 4700 140 120 327 8
550 341.0 24290 48580 4200 160 135 367 10
600 471.0 33550 67100 3800 175 153 406 10
700 659.0 46945 93890 3300 180 178 464 10
750 846.0 60265 120530 3000 190 197 503 12
800 1103.0 78575 157150 3000 203 210 546 12

Engineering Data

Size Mass Inertia
MR^2		 Maximum
Misalignment		 Torsional
Stiff		 Axial
Spring
Rate		 Bolt Tight Torques
      AXIAL RADIAL      
  KG KG.M^2 MM MM MNM/Rad N/MM # NM ##MM
100 1.8 0.001 0.9 0.6 0.07 50 10 6
125 2.5 0.002 0.9 0.8 0.07 70 24 10
162 4.0 0.005 0.9 1.2 0.21 100 24 10
200 7.0 0.014 0.9 1.2 0.24 190 48 24
225 7.5 0.018 0.9 1.2 0.31 275 48 24
262 12.0 0.041 1.1 1.2 0.50 350 48 24
312 18.0 0.090 1.3 1.2 0.76 415 80 48
350 26.0 0.160 1.4 1.2 1.18 500 200 80
375 36.0 0.230 1.6 1.5 1.50 540 200 80
425 48.0 0.420 1.7 1.5 2.35 725 400 200
450 60.0 0.600 1.8 1.7 2.60 755 400 200
500 85.0 1.120 2.1 1.9 4.30 920 400 200
550 122.0 2.100 2.3 2.1 6.20 920 540 200
600 164.0 3.400 2.6 2.1 7.60 900 700 400
700 250.0 6.600 2.9 2.4 12.4 1230 1400 540
750 305.0 9.700 3.2 2.4 16.5 1480 1800 700
800 393.0 14.800 3.5 2.6 ON REQ ON REQ 2400 700
Mass, Inertia, Stiffness are at max bore with standard dimension C listed above. Other C Dimension C dimension are available as required on request. Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack. Misalignment limits are for speeds upto 3000 RPM. For higher Speeds consult us. Bolt Tightening Torques - # for Disc Pack Bolts, ## for spacer bolts.
Download PDFCatalogue No.:UT-54 | Revision 00