Series 80 CMR SPL Download PDFCatalogue No.:UT-80 CMR SPL | Revision 00

Type CMR Couplings are similar to the Type AMR  except that one hub is substituted by a flange adaptar plate . This makes the coupling specially suitable for direct attachment to the Flywheel of engines , reciprocating compressors etc without an extension shaft.

General Assembly Drawing

Series 80 CMR Diagram
Adaptar
Bolting Light Duty SAE
Bolting Unique Heavy Duty
Type OD PCD No. of Holes Size PCD No. of Holes Size
  Inch Inch   Inch Inch   Inch
A 8.500/8.498 7.875 6 11/32 7.500 8 13/32
B 9.500/9.498 8.750 8 11/32 8.625 8 15/32
C 10.375/10.373 9.625 6 13/32 9.500 8 15/32
D 12.375/12.373 11.625 8 13/32 11.500 8 17/32
E 13.875/13.873 13.125 8 13/32 12.500 8 21/32
F 16.000/15.998 - - 14.375 8 25/32
G 18.375/18.373 17.250 8 17/32 16.750 8 25/32
H 20.375/20.372 19.250 8 17/32 18.500 8 29/32
I 22.500/22.497 21.375 6 21/32 20.500 8 1-1/32"
J 26.500/26.497 25.250 12 21/32 24.500 12 1-1/32"
K 28.875/28.872 27.250 12 25/32 26.875 12 1-1/32"

Dimensions and Standard Sizes

Size Nominal
HP/100
 Rating
Torque

 Peak Torque Max Speed Max Bore A E C G T
  RPM NM NM RPM MM MM MM MM MM MM
162 7 500 1000 3000 48 117 44 85 70 8
200 13.5 960 1710 3000 60 146 54 100 84 10
225 19 1356 2564 3000 65 153 64 100 95 10
262 33 2350 4700 3000 80 175 73 115 114 11
312 56 3990 7980 3000 95 206 86 135 138 13
350 76.2 5425 10850 2750 100 232 95 150 152 13
375 100 7125 14250 2500 115 256 102 170 165 14
425 140 9975 19950 2200 125 279 108 180 177 18
450 170 12110 24220 1900 135 302 114 195 189 16
500 270 19230 38460 1800 150 341 127 222 213 19
550 400 28500 57000 1800 170 381 140 250 240 22
600 500 35625 71250 1800 185 425 153 276 262 25
Q600 800 57000 114000 1800 185 425 178 276 262 25
700 800 57000 114000 1500 210 481 178 316 298 25
Q700 1200 85500 171000 1500 210 481 184 316 298 25
750 1100 78375 156750 1500 225 524 184 343 321 29
Q750 1600 114000 228000 1500 225 524 197 343 321 29
800 1600 114000 228000 1200 245 568 197 375 349 32
Q800 2120 151000 302000 1200 245 568 197 375 380 32

Engineering Data

Size Mass Inertia
 Maximum Misalignment Torsional Stiffness F. Wheel Std. Adaptars Bolt Torque
Axial Radial
  KG KG.M^2 MM MM MNM/RAD   NM
162 4 0.01 1.30 0.58 0.30 A,B,C,D 24
200 6 0.02 1.80 0.66 0.51 A,B,C,D,E 48
225 8 0.04 1.40 0.66 0.97 A,B,C,D,E 48
262 14 0.06 1.50 0.77 1.49 A,B,C,D,E,F,G 48
312 20 0.12 1.90 0.92 2.69 B,C,D,E,F,G,H 80
350 28 0.20 2.00 1.01 4.00 D,E,F,G,H,I 200
375 38 0.33 2.30 1.13 4.91 D,E,F,G,H,I 200
425 50 0.57 2.50 1.23 7.10 E,F,G,H,I 400
450 63 0.80 2.80 1.32 8.30 F,G,H,I,J 400
500 90 1.53 3.00 1.51 12.50 F,G,H,I,J,K 400
550 122 2.48 3.20 1.70 18.60 G,H,I,J,K 540
600 160 3.96 3.70 1.88 19.30 H,I,J,K 700
Q600 160 3.96 3.70 1.88 22.00 H,I.J.K 700
700 250 7.63 4.10 2.14 31.60 H,I,J,K 1400
Q700 250 7.63 4.10 2.14 35.00 H,I,J,K 1400
750 304 10.60 4.60 2.33 39.00 J,K 1400
Q750 304 10.60 4.60 2.33 42.00 J,K 1400
800 400 18.10 5.00 2.52 58.00 J,K 1400
Q800 400 18.10 5.00 2.52 60.00 J,K 2200
Max Bore capacity with rectangular Key Mass and Inertia are at Max Bore with minimum Adaptar Diameter. Maximum Speed corresponds to smallest standard adaptar. Hubs , Spacer , Adaptar Plate of Forged Steel ASTM A668 Gr F. Disc Packs of Stainless Steel Bolts Gr 10.9 ASTM A490M , Lock Nuts ASTM A194 Gr 2H Each Hub with 2 No Puller Holes Hubs, Spacer Dynamically Balanced to 6350 W/N gm.mm , Assembly Check Balanced to 63500 W/N gm.mm. Other Spacer Length, Torsional Stiffness to customer requirement on request.

Download PDFCatalogue No.:UT-80 CMR SPL | Revision 00