Series 80QX-SPLDownload PDFCatalogue No.:UT-80QX-SPL | Revision 00

This is a simple variations of series 80Q. 80Q XSPL has captured spacer safety feature and also a larger bore capacity.

General Assembly Drawing

Series 80QX SPL Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore E, Hub Length D Dia G Dia Std C
  RPM NM NM RPM MM MM MM MM MM
250 37 2635 5270 15300 90 115 130 76 173
300 84 5985 11970 14000 110 140 157 86 203
312 84 5985 11970 14000 110 140 157 86 203
350 95 6770 13540 13000 115 155 162 95 227
375 150 10685 21370 11700 130 170 187 102 252
425 210 14960 29920 10800 140 185 191 108 273
450 260 18500 37000 10000 160 200 211 114 293
500 400 28500 57000 8860 180 230 251 127 333

Engineering Data

Size Mass Inertia Maximum
Misalignment		 Torsional
Stiff		 Axial
Spring Rate		 Bolt Tight Torque
      AXIAL RADIAL  
  KG KG.M^2 MM MM MNM/Rad N/MM # NM ## MM
250 22 0.1 2.2 1.2 0.80 220 80 48
300 36 0.22 3.0 1.2 1.10 370 200 80
312 32.2 0.20 1.9 1.2 1.40 415 80 80
350 46 0.37 2.0 1.2 1.50 500 200 200
375 61 0.58 2.3 1.5 2.80 540 200 200
425 85 0.99 2.5 1.5 3.70 725 400 400
450 106 1.42 2.8 1.7 5.80 755 400 400
500 137 2.47 3.0 1.9 6.60 920 400 400

* meet API 610 requirements

* can be supplied to API 671 on request

These couplings have captured centre member this feature prevents spacer sub assembly. From flying off even in unlikely event of disc as well as bolt failure. Mass, Inertia, Stiffness are at max bore with standard spacer dimension C listed above. Other C dimension are available as required on request. Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack .Misalignment limits are for speeds upto 3000 RPM. For higher speeds consult us. Bolt Tightening Torques- # for Disc Pack Bolts, ## for Hub Bolts .

Download PDFCatalogue No.:UT-80QX-SPL | Revision 00