UNIQUE TRANSMISSION (INDIA) PVT. LTD.

Dimensions and Standard Sizes

Size	Rating HP/100	Max Bore	Max Speed	A Dia	B	G Dia	Fig	Standard Spacers - C
	RPM	MM	RPM	RPM	MM	MM		MM
62SPL	0.42	28	9000	62	22	-	1	100,140,180
126SPL	2.40	42	6500	98	28	60	2	100,140,180
163SPL	3.50	55	6000	117	36	-	3	100,140,180,250
201SPL	5.30	65	5500	138	54	90	2	140,180,250
226SPL	11.00	75	5200	156	58	114	4	140,180,250,300
263SPL	15.00	75	4800	181	76	113	5	140,180,250,300
301SPL	22.30	90	4500	208	82	129	5	180,250,300,350
351SPL	44.90	100	4100	241	82	148	5	180,250,300,350
401SPL	57.00	112	3900	279	105	168	5	180,250,300,350
451SPL	75.00	125	3600	321	133	187	5	180,250,300,350

Engineering Data

Size	Weight	Inertia MR^2	Weight Change	Inertia Change	End Float +-	Bolt Tightening Torque
	KG	KG.CM^2	KG/CM	KGCM^2/CM	MM	NM
62SPL	1.5	7.9	0.016	0.03	0.70	4
126SPL	3.0	36.0	0.080	0.41	1.16	18
163SPL	5.0	97.0	0.080	0.81	1.45	18
201SPL	9.6	215.0	0.120	1.84	1.70	34
226SPL	12.3	359.0	0.140	2.76	1.95	58
263SPL	16.8	660.0	0.170	4.72	2.25	85
301SPL	24.4	1320.0	0.220	7.94	2.60	130
351SPL	40.5	2970.0	0.320	14.95	3.00	240
401SPL	63.5	5800.0	0.480	29.90	3.50	270
451SPL	90.7	10250.0	0.550	41.40	3.90	350

Multiply MR^2 Values by 4 to obtain GD^2 values. Weight & Inertia are at max bore with smallest standard spacer. For other spacers use weight & inertia change values to calculate actual figures. Maximum permissible angular misalignment is 1.0 deg for 1500 RPM and 0.5 deg for 3000 RPM at each disc Pack. Standard Construction has hubs, spacers of class2 forged steel IS2004 and Disc Packs of Stainless steel. For plated bolts reduce Tightening Torques by 20%. Spacer Dimensions other than standard spacers can also be supplied.